Recent medical studies show that mold is one of the most common causes of allergic symptoms and certain types of mold can cause health disorders.
If a structure has visible mold, a strong musty odor, moisture problems, or high humidity problems, mold sampling should be completed. Our inspectors can perform an Indoor Air Quality test or take Surface Samples to determine types of mold present, amount of mold present, and if any health risks exist. Samples are sent priority overnight to our professional laboratory in Florida, Inspector Lab, for analysis and a report will be issued in 1-3 business days.
It is also important to understand why mold is growing in a home. Our inspectors can tell you possible reasons why the home is experiencing a problem with mold growth and what repairs are needed to eliminate mold growth in the home.
We know mold testing can be confusing! Please read about the different types of testing WIN Home Inspection offers and the pricing for each option. If you are unsure what type of testing to have conducted, your WIN Home Inspection inspector can help you decide onsite, just let our office know!
If visible mold is present in the home, your WIN Home Inspection inspector can take a surface sample at the area in question. Surface testing includes one physical sample taken at the affected area. We will also use moisture meters at these areas to determine if wet/damp at the time of testing. If multiple affected areas are present, additional samples may be needed for accuracy.
A surface test will tell you:
What types of harmful indoor molds, if any, are present in the test area.
If any spore exposure risks are present for the occupants due to mold growth.
If the area is “current growth” or “former growth” caused by water intrusion or humidity problems.
Surface testing is recommended when:
There is visible or suspected mold present.
An area that has had previous clean up or removal of mold.
This package includes 1 indoor air sample, 2 control/baseline sample on the exterior, and 1 surface test in the affected area.
Some moisture problems and/or mold problems may not be visible, and it is important to know that some molds may release spores into the indoor breathing air. Indoor air samples are recommended at approximately every 800-1000 sq. ft. **If the affected area is larger than 2000 sq. ft, or if multiple levels in the structure are of concern, room design issues, additional samples may be needed, your inspector will let you know.
An air quality test will tell you:
If an abnormal amount of harmful spores are present in the indoor air. If indoor mold counts are normal and do not pose a risk to indoor air quality.
If there are possible hidden areas of mold growth, water intrusion, or humidity problems.
Indoor air quality testing is recommended when:
There is a concerning musty odor in the home.
Mold or suspected mold growth is visible in the home.
There was a past water intrusion problem.
An occupant of the home is predisposed to respiratory distress.
You want to verify the effectiveness of mold remediation.
Some molds will release spores into the air and some will not. Combining air and surface testing will ensure that the affected area is properly analyzed. **More cassettes may be needed based on size, location, room design, etc. Your inspector will let you know our recommendations at the inspection
**Each Additional Surface/Air Sample $50
*Trip Fee (if testing not completed during a home inspection) $100
All our inspectors are IAC2 qualified, and all reports are tested and verified by a Ph.D. mycologist from InspectorLab.